News

Centrifuge Oil Filtration System
____________________________________________________________

Specifications:

• Pumping Unit

  • • Gear pump
    • 1 H.P. motor
    • 115/230 Volt, Single Phase
    • Pressure relief
    • Pressure gauge
    • NEMA 1 manual start-stop switch

• Centrifuge

  • • Processes up to 4 GPM
    • Holds up to 2,000 cc of contaminants
    • Speeds up to 5,000 RPM

• Oil/Air Separation Chamber

  • • Operating Capacity: 150 Gal.
    • Intergral centrifuge cleaning
    and maintenance fixture
    • Paddle flow indicator
    • Lateral strainer with 20 mesh screen
    • Drain with ball valve
    • Vented to atmosphere with breather
    • Oil sampling port
    • Inspection port

• Kidney Loop Design

• Overall Dimensions:

  • • Height: 159” to top of centrifuge
    • Footprint: 32” x 32”
 
 

Features and Benefits:

• Centrifuge is cleanable, highly efficient bypass filtration solution.
• Oil passes through a spinning rotor. The force extracts solid contaminants from the fluid stream.
• Particles as small as 1/10 micron are captured.
• Contaminants accumulate on an inexpensive, replaceable paper liner as a solid cake.
• Centrifuge is self powered by internal pressure and requires no external drive.
• Reduces maintenance frequency and requires minimal service.
• Reduced oil and filter consumption cuts waste disposal costs.
• Increases life of expensive components (valves, pumps, motor, etc.) and reduces downtime.
• See back of sheet for Filtration performance charts.

______________________________________________________

 

 

 
 








R.L.Best News • Engineering Resources • Extrusion Handling Systems • Reconditioned Extrusion Presses
Replacement Parts • New Extrusion Presses • Stock Equipment • Pre-Owned Equipment • Location • Help Wanted
   
Extrusion Press Parts and Service
723 Bev Road • Boardman, Ohio 44512
Phone (330) 758-8601 • Fax (330) 758-9413
Extrusion Press Handling Systems
1775 E. Lake Mary Blvd. • Sanford, Florida 32773
Phone (407) 321-1285 • Fax (407) 321-1277